Float valve
A float valve is a mechanical feedback mechanism that regulates fluid level by using a float to drive an inlet valve such that a higher fluid level will force the valve closed whilst a lower fluid level will force the valve open. This is an example of negative feedback and of proportional control.
The most common use of a float valve is to control the filling of water in the water tank (Cistern) of a commode (toilet).
This is done by utilizing a Balloon type float valve .Its working is thus
A ball shaped hollow sphere , made of hardened Rubber or Copper alloy sheet is sealed so that water cannot enter it. This is attached to an arm that in turn is attached to the valve /Flap .
The valve /Flap controls the opening of the pipe through which water flows into the tank/Cistern
Under Empty condition, valve is fully open and balloon is suspended freely.
As water ingresses into the container, the balloon ,on account of trapped air and buoyancy ,begins to rise /Float on the water surface.
Soon the balloon floats hgh enough so that the arm attached to the Balloon CLOSES the valve and stops water from flowing in.
Thus when water is filled to a certain level , its inflow is stopped by this arrangement.
See also
- ballcock
Source: adapted by the editor from Wikipedia, the free encyclopedia; from the article "Float valve". Image Credit.
